JPHEAT editors / Updated 2026-11-03
The Single, sized for your full length.
The JPT100J is about 190 × 100 cm. It is a full-length heated mattress pad used on top of your bedding. Please check the size of your usual bedding and where you will lay it.
Half, where you want it.
The JPT7080J is about 70 × 80 cm. This Half size can go where you want it on your bedding, such as the upper-body side or the foot end. Spread out the unit, then lay a sheet over it.
The same technology in both.
Both use ORIZUMI, a planar heating element with no heater wire. The temperature setting is 20–50 °C (in 1 °C steps) and the off timer is 1–12 hours. The set temperature differs from the surface temperature and the temperature you feel. Start at a lower temperature and find the one that suits you. For long periods of use, set the temperature to about 30–38 °C as a guide and take care to avoid low-temperature burns. For conditions of use, please check the instruction manual for the product.
Based on JPHEAT product specifications and manuals.