Far-infrared heated floor mat
JPHEAT Mat 50 × 60
JPT5060 / Beige
HK$610(+ shipping)Buy
At your usual seat,
warmth at your feet.
When you read, and when you work.
A small far-infrared heated floor mat, laid at your feet.
Your usual spot, a little more comfortable.
- Size
- 50 × 60 cm
- Under a desk, by a sofa.
- Power
- AC 220V
- For household outlets
- Tech
- Far IR × planar
- Structure with no heater wire
Warmth in daily life.
At your feet, at ease.
Open a book on the sofa. One more task at the desk.
A 50 × 60 cm mat at your feet, where you spend long hours.
A compact shape you can place where you need it.
Sized for your feet.
About 50 × 60 cm. Room to rest both feet while seated in a chair.
These show the JPT5060 in real use. Please lay it on a hard, flat floor.
JPT5060 / Product film
Warmth for
everyday life.
Lay it down, touch it, settle in.
A look at time spent with this mat.
The film is illustrative. The glow and structure shown are illustrative. The product does not actually glow.
Shaped to fit.
A small mat for your feet.
Under a desk, by a sofa.
About 1 cm thick, in a beige that blends into the floor.
Picture where it will go as you check the size.
60 cm50 cmJPHEAT warmth
At the heart of warmth,
the ORIZUMI element.
Water-based carbon heating material on a fine woven mesh.
The way electricity becomes heat, in one flat sheet.
Here is JPHEAT far-infrared technology.
Wire heating example
Structure with heater wire
Heats along the wire
JPHEAT
Planar structure in all current products
A surface structure with no heater wire
JPT5060 / Shown at the 50 × 60 cm ratio
Structure diagram, not a measured comparison of temperature distribution or performance.
LINE / SURFACE
Heats as a surface,
not a wire.
All current JPHEAT products share
a planar heating element with no heater wire.
A woven mesh of water-based carbon
makes heat when current flows.
MATERIAL / ORIZUMI
From a fine mesh
to a heating sheet.
Water-based carbon in a fine woven mesh.
When powered, the mesh itself heats.
Threads, not one wire, warm as a surface.
LIGHT / Far infrared
Unseen light,
as warmth.
Far infrared is a kind of unseen light.
A warmed surface gives off this light.
Absorbed by an object, it turns into heat.
JPHEAT / Into daily life
Different forms,
one heating technology.
For time on the floor, for time to unwind in bed.
One shared heating technology,
shaped for where it is used.
TECHNOLOGY IN MOTIONAuto-play / 24 SEC
JPT5060 / THERMOGRAPHY
The element inside,
seen by temperature.
The JPT5060, powered on, shot with an infrared camera.
The ORIZUMI planar heating element, spread across the mat,
shows up as a temperature distribution.
The temperature reading shown on the camera screen when the photo was taken. It does not show the set temperature or the temperature of the whole product. In use, start at a lower temperature, with 38 °C as a guide.
The colors are a guide to the surface temperature distribution. The distribution and readings change with the temperature setting, room temperature, elapsed time and setup. The edge border does not heat. Far-infrared wavelength and emissivity cannot be read from this image. The emission measurements on the Technology page are for a JPT100J test sample, not for this product.
The structure of the planar heating element is a registered Japanese utility model.Utility Model Registration No. 3241937
Far infrared, explained →Touched every day.
If you spill,
wipe it up right away.
The surface is PVC with everyday water repellency.
If you spill coffee, milk, water or the like, please wipe it up right away.
A calm beige, with a smooth feel.
Water-repellent PVC / Actual surface. Not waterproof.
Wipe off dirt.
Turn off the power and unplug it beforehand. Wipe lightly with a damp, well-wrung cloth.
Not washable.
Water-repellent does not mean waterproof. Do not wash the whole unit or soak it in water.
Store it rolled up.
Once the unit has cooled, roll it up without creasing and store it. Do not turn it on while folded.
TEMPERATURE & TIME
Settings, at hand.
Temperature from 20 °C to 50 °C in 1 °C steps. Off timer from 1 hour to 12 hours.
Setup is done on the small controller along the cord.
1 °C steps
00 cancels
With no timer set (default)
Start at a lower temperature and find the one that suits you. As a guide, set it to 38 °C. Staying in contact with the same spot for a long time can cause low-temperature burns.
This illustrates operation, with the display and lamps laid over a photo of the controller included with the JPT5060. The numbers shown are an example. For actual operation, please check the instruction manual.
Usage
Warmth, on the floor.
Straight, on a hard, flat floor.
For correct use in daily life.
- 01
Spread it flat.
Lay it with no folds or overlaps. The insulation layer is built into the underside, so no separately sold insulating underlay is needed beneath it. Do not use it on soft surfaces that give way, such as a bed or sofa.
- 02
Plug into an outlet.
AC 220 V specification (Hong Kong / Macau version), UK 3-pin plug adapter included. Use the included power cord, plug adapter and controller, and check the connection.
- 03
Start at a low setting.
Set the temperature and off timer. Avoid long contact with the same spot.
Please use it on a hard, flat floor. Our safety requests are listed under SAFETY on this page.
SAFETY
To use it correctly
and for a long time.
Comfortable time on the floor.
Here are five things we ask.
- 01
Nothing on top.
Do not place items that trap heat, such as futons, blankets or cushions, on the unit or the controller.
- 02
With someone nearby.
During use, stay where you can check on it. Turn off the power when sleeping, napping or going out.
- 03
Watch over children and seniors.
Small children, elderly people and anyone who has trouble feeling heat should use it under the watch of a guardian or caregiver.
- 04
Do not stay long in one spot.
To prevent low-temperature burns, do not keep the same spot in contact for a long time. Change your posture or position from time to time.
- 05
A guide: 38 °C.
Adjustable within 20–50 °C. Start at a lower temperature and find the one that suits you, with 38 °C as a guide.
- Do not use it to warm pets or for any other unintended use.
- If you have taken medicine that causes drowsiness, have been drinking or are feeling unwell, take extra care to avoid low-temperature burns.
- Do not bend the unit or damage it with needles or blades. Do not spill water or tea on the controller.
- Before use, always read “Safety precautions” in the instruction manual.
Specs
Specs
JPHEAT Mat / JPT5060
| Model | JPT5060 |
|---|---|
| Product | Far-infrared heated floor mat |
| Size | About 50 × 60 cm |
| Thickness | About 1 cm |
| Color | Beige |
| Surface | PVC (water-repellent) |
| Underside | Built-in insulation layer (no separate insulating underlay or aluminum sheet needed, spread it straight on the floor) |
| Heating element | ORIZUMI planar heating element made with water-based carbon |
| Power | AC 220 V, 50 Hz |
| Rated power | 80W |
| Temperature | 20–50 °C (in 1 °C steps) |
| Off timer | 1–12 hours |
| Safety standard | UK 3-pin plug adapter included |
| Warranty | 1 year (under the terms of the warranty card) |
| Designed / Made in | Japan / China |
| Utility model | Japanese Utility Model Registration No. 3241937 (structure of the planar heating element) |
Do I need an insulating underlay (aluminum mat) beneath it?
No. The insulation layer is built into the underside, so you can spread the heated floor mat straight on the floor without a separately sold insulating underlay or aluminum thermal mat beneath it. Please use it on a hard, flat floor.
Can I wash it in water?
No, it cannot be washed in water. The surface is PVC with everyday water repellency, but it is not waterproof. Turn off the power, unplug it, then wipe off dirt with a damp, well-wrung cloth.
Can I use it on bedding?
It is a floor product. Please lay it on a hard, flat floor. Do not lay it on a bed or sofa, and do not use it while sleeping or napping.
What should I keep in mind for safety?
Even at relatively low temperatures, keeping the same spot in contact for a long time can cause low-temperature burns. Start at a lower temperature, with 38 °C as a guide. If a small child, an elderly person or someone who has trouble feeling heat uses it, always stay nearby and watch over them. Do not turn it on while folded over, and do not cover it with a blanket or anything similar.
One for your home.
At your usual seat,
warmth at your feet.
JPHEAT Mat 50 × 60
JPT5060 / About 50 × 60 cm / Beige
HK$610(+ shipping)
Shipping: HK$67 per item. Ships from our Asia-Pacific warehouse (Shanghai, China) by SF Express within 3 business days; delivery takes about 5–7 days.
Ordering from Hong Kong or Macau
- Hong Kong and Macau orders ship from our Asia-Pacific warehouse (Shanghai, China) by SF Express within 3 business days and arrive in about 5–7 days.
- At checkout, please enter the recipient’s real name (SF Express needs it for delivery).
- Power: the heated floor mats (JPT5060, JPT60100, JPT16060, JPT200120) are AC 220 V Hong Kong / Macau versions; the heated mattress pads use an AC 100–240 V adapter. Every product comes with a UK 3-pin plug adapter.
- Change-of-mind returns are not accepted. For an initial defect, damage in transit or a wrong item, email us within 7 days of delivery (info@jpheat.jp) and we will exchange it at our cost.
Payment is on the Shopify checkout page. You can use credit cards (VISA / Mastercard / JCB / American Express / Diners Club / Discover) and other methods; the checkout page shows what is available.
Ask about this productExchanges: for an initial defect, damage in transit or a wrong item, contact us within 7 days of delivery (details).