24V FAR INFRARED MATTRESS PAD
JPHEAT Pad Half
JPT7080J / Far-infrared heated mattress pad
NT$3,744(+ shipping)Buy
A place to pause,
with a little warmth.
A small pad, in Half size.
The soft feel of cotton, and far-infrared warmth.
On your usual bedding, a warmth to settle into.
- SIZE
- 70 × 80 cm
- Half, half-length
- POWER
- DC 24V
- Dedicated AC adapter included
- TECHNOLOGY
- Far infrared × planar heating
- Structure with no heater wire
Choose a spot
Where you want it,
one small pad.
A Half size for part of the body, about 70 × 80 cm.
Lay it where you want it on your bedding,
then add a sheet on top.
Upper-body side
Lie down for a pause. Warmth while you unwind.
In the middle
Placed in the middle of the bedding, one simple pad.
At the foot end
Stretch out your legs and take your time. Calm warmth at the foot end.
The images illustrate placement. They were taken without the sheet so the product can be seen.
In use, please lay it under a sheet.
JPHEAT / Product film
Warmth for a place
to feel at ease.
One small pad on your bedding.
More room to unwind.
The film is illustrative. In use, please lay the pad under a sheet.
The film could not be loaded. Open the film
JPHEAT / FAR INFRARED TECHNOLOGY
Even in a small pad,
ORIZUMI planar heating.
The heat comes from a single heating element made with water-based carbon.
The Half size, too, carries JPHEAT planar heating technology.
The weave that makes warmth.
The light is illustrative.Warmth from the ORIZUMI planar heating element.
The structure and light are illustrative. Layer thickness and spacing are not to scale.
THE HEART OF WARMTH
From one ORIZUMI sheet
to everyday warmth.
ORIZUMI, a planar heating element made with water-based carbon.
It makes heat as a surface, with no heater wire.
JPHEAT warmth begins with this one sheet.
INSIDE THE COMFORT
5 layers, built up for comfort.
From the cotton outer fabric to the heat-spreading sheets around the heating element.
Each material has a role.
- 01
100% cotton outer fabricThe feel, and the soft look of the quilting
- 02
Heat-spreading sheetSpreads the heat of the element across a surface
- 03
ORIZUMI planar heating elementA heating element made with water-based carbon
- 04
Heat-spreading sheetWraps the heating element above and below
- 05
Quilted liningThe underside finish that rests on the bedding
Wire heating example
Structure with heater wire
Heats along the wire
JPHEAT
Planar structure in all current products
A surface structure with no heater wire
Structure diagram, not a measured comparison of temperature distribution or performance.
LINE / SURFACE
Heats as a surface,
not a wire.
All current JPHEAT products share
a planar heating element with no heater wire.
A woven mesh of water-based carbon
makes heat when current flows.
MATERIAL / ORIZUMI
From a fine mesh
to a heating sheet.
Water-based carbon in a fine woven mesh.
When powered, the mesh itself heats.
Threads, not one wire, warm as a surface.
LIGHT / Far infrared
Unseen light,
as warmth.
Far infrared is a kind of unseen light.
A warmed surface gives off this light.
Absorbed by an object, it turns into heat.
JPHEAT / Into daily life
Different forms,
one heating technology.
For time on the floor, for time to unwind in bed.
One shared heating technology,
shaped for where it is used.
TECHNOLOGY IN MOTIONAuto-play / 24 SEC
MEASURED
Test data for the ORIZUMI planar heating element (a JPT100J test sample) is on the JPT100J product page and in Technology of warmth.
Cotton, finely stitched
Cotton softness
you feel in your palm.
The outer fabric is 100% cotton.
Fine stitching that draws a floral pattern, and a soft loft.
Comfortable each time you touch it.
TEMPERATURE & TIME
Settings, at hand.
Temperature from 20 °C to 50 °C in 1 °C steps. Off timer from 1 hour to 12 hours.
Setup takes just the four buttons.
1 °C steps
00 cancels
Start at a lower temperature and find the one that suits you. For long continuous use, about 30–38 °C is a guide.
This illustrates operation, with the display and lamps laid over a product photo. The numbers are an example. For actual operation, see the instruction manual.
DESIGNED FOR YOUR BEDDING
Lay one pad
where you want it.
Spread it flat on a futon or mattress.
Add a sheet, and your usual bedding gains warmth.
- 01
Flat, where you want it.
On a futon or mattress, with no folds, overlaps or wrinkles.
- 02
Add a sheet on top.
Use the unit under a sheet. The Half size has no elastic bands for fastening.
- 03
Settings at hand.
Set it on the dedicated controller. Start low and choose a comfortable warmth.
Before use, please check the position of the unit and look for wrinkles. For details on use, please see the instruction manual.
DC24V / 45W
From a home outlet to DC 24 V.
The dedicated AC adapter converts AC to DC.
Rated power consumption of the Half type is 45 W.
Adapter input: AC 100–240 V, 50/60 Hz (Taiwan version).
Carries the BSMI commodity safety label. It is not rechargeable.
CARE & STORAGE
Let it cool before storing.
Turn off the power and unplug it first.
Once the unit has cooled, it can be folded and stored.
The unit is not washable. Wipe off dirt with a damp, well-wrung cloth. Do not turn it on while folded.
SPECIFICATIONS
Specs
JPHEAT Pad Half / JPT7080J
| Model | JPT7080J |
|---|---|
| Product | 24 V far-infrared heated mattress pad / Half |
| Size | About 70 × 80 cm (outer dimensions) |
| Color | Ivory |
| Outer fabric | 100% cotton |
| Heating element | ORIZUMI planar heating element made with water-based carbon |
| Power supply / Rated power | DC 24 V low voltage (through the dedicated AC adapter) / 45 W |
| Dedicated AC adapter input | AC 100–240 V, 50/60 Hz |
| Temperature | 20–50 °C (in 1 °C steps) |
| Off timer | 1–12 hours |
| Setup | Laid flat on bedding and used under a sheet (no elastic bands) |
| Included | Dedicated controller, dedicated AC adapter, power cord |
| Safety standard | Safety label: carries the BSMI commodity safety label |
| Designed / Made in | Japan / China |
| Warranty | 1 year (under the terms of the warranty card) |
| Utility model | Japanese Utility Model Registration No. 3241938 (structure of the planar heating element) |
Temperatures shown are set temperatures.
Safety information
- If a small child, an elderly person, someone who has trouble feeling heat or someone who cannot adjust the temperature alone uses this product, always stay nearby and watch over them.
- Start at a lower temperature and find the one that suits you. For long continuous use, set the temperature to about 30–38 °C as a guide. Staying in contact with the same spot at a higher temperature can cause low-temperature burns.
- Lay the unit under a sheet and do not use it in direct contact with your skin.
- At bedtime, please use the off timer.
- Before use, always read “Safety precautions” in the instruction manual.
What does DC 24 V (low voltage) mean?
Power from a household outlet (AC 110 V) is converted to 24 V DC by the included dedicated AC adapter, then sent to the unit. Just 24 V DC runs through the unit and the planar heating element. It is not rechargeable, so please keep the adapter plugged in during use.
Please check before use
Lay the unit flat and cover it with a sheet. Do not use it as a blanket or wrap it around your body. Do not turn it on while it has folds, overlaps or wrinkles.
Warming the same spot for a long time can cause low-temperature burns, even at relatively low temperatures. Start at a lower temperature. If an infant, an elderly person or someone who has trouble feeling heat uses this product, always stay nearby and watch over them. Do not use it to warm pets or for any other unintended use.
Care and storage
The unit is not washable. Turn off the power, unplug it and wipe off dirt with a damp, well-wrung cloth. When storing, fold it after the unit has cooled.
Warranty and product questions
The warranty period is 1 year. For details, please check the terms on the warranty card. Product questions are welcome by email.
info@jpheat.jp ↗
BRING THE WARMTH HOME
For a short rest,
a warm pad.
JPHEAT Pad Half
JPT7080J / About 70 × 80 cm / Ivory
NT$3,744(+ shipping)
Shipping: NT$274 per item. Ships from our Asia-Pacific warehouse (Shanghai, China) within 3 business days; delivery takes about 7–10 days.
Payment is on the Shopify checkout page. You can use credit cards (VISA / Mastercard / JCB / American Express / Diners Club / Discover) and other methods; the checkout page shows what is available.
Ask about this productReturns: 7 days from delivery, item complete, return postage paid by the buyer (details).